T&S Hardwoods
Milledgeville Mill
T & S Hardwoods’ Milledgeville Mill is one of the most efficient
sawmills in the hardwood industry. Near the geographical center of Georgia,
it is situated between the state’s Piedmont and upper Coastal Plain regions.
Desirable species include White Ash, Red Oak, White Oak, Tulipwood (Yellow Poplar),
Hickory, tupelo, Soft Maple, Hackberry, Sycamore, Elm and Sap Gum.
|
| Annual production: 20 million board feet |
| Dry kiln holding capacity: 220,000 board feet |
| Fan air dryer capacity: 95,000 board feet |
| Air drying inventory: 5 million board feet |
| Thin Kerf Gang Saw |
| Seven foot band saw head-rig |
| Double end trimming on all lumber |
| Computer controlled dry kilns |
| Lumber measured and inspected after kiln drying |
| Individual package tallies |
| Thickness range from 4/4 to 12/4 |
| Export preparation and loading |
| Rail car, box car, flatbed and container loading |
|
T&S Hardwoods
Sylva Mill
Ideally located in the hear of the Appalachian Mountains of
North Carolina, T & S Hardwoods’ Sylva Mill is equipped to provide you with the superior
quality lumber inherent in this region. The area’s cool 4000 to 6000 feet elevation and
abundant rainfall produces the growth of world-renowned premium Appalachian hardwoods.
Species include red Oak, White Oak, Tulipwood (Yellow Poplar) Cherry, Soft Maple, Hard Maple,
Basswood, and Ash.
|
| Annual production: 20 million board feet |
| Dry kiln holding capacity: 220,000 board feet |
| Fan air dryer capacity: 450,000 board feet |
| Thin Kerf Gang Saw |
| Air drying inventory: 6 million board feet |
| Seven foot band saw head-rig |
| Double end trimming on all lumber |
| Computer controlled dry kilns |
| Lumber measured and inspected after kiln drying |
| Individual package tallies |
| Thickness range from 4/4 to 12/4 |
| Export preparation and loading |
| Rail car, box car, flatbed and container loading |
|
Sylvan Hardwoods, LLC
McRae Mill
Sylvan Hardwoods, located in McRae, Georgia, is situated on
120 acres just 45 miles from a major east-west interstate. The mill draws its resources
from the prime hardwood forests of the Piedmont and upper Coastal Plain regions. Species
include Ash, Red Oak, White Oak and Poplar.
|
| Annual production: 20 million board feet |
| Dry kiln holding capacity: 200,000 board feet |
| Air drying inventory: 6 million board feet |
| Seven foot band saw head-rig |
| Thin-kerf gang saw |
| Double end trimming on all lumber |
| Computer controlled dry kilns |
| Lumber measured and inspected after kiln drying |
| Individual package tallies |
| Thickness range from 4/4 to 12/4 |
| Export preparation and loading |
| Rail car, box car, flatbed and container loading |
|
